Available in 210lb, 350lb and 420lb sets consisting of 25lb, 35lb, and 45lb bumper plates that provide a dead bounce, and easy weight identification. The reinforced steel molded in hubs are coated with a proprietary material that forms a chemical bond with the rubber that prevents separation. Most competitors press in the hub after the rubber is molded which will over time, always lead to failure. The 25 lb – 45 lb plates are the standard IWF 450mm in diameter. These bumper plates are slightly darker than our standard colored bumper plates.
Our unique and proprietary manufacturing process allows us to produce a bumper that has both higher tensile strength and hardness than competitor plates. This is accomplished by molding with a harder rubber near the core, which prevents the hub from separating and plate wobble over time, and a softer rubber on the outside to act as a buffer deadening the blow and sound from the plate when dropped. The rubber itself is 100% virgin and passes REACH and Rohs standards with a weight tolerance of /-0.5%.
210LB SET:
350LB SET:
420LB SET:
|
SKU
|
BPSET-210BL |
|
AVAILABLE SETS
|
210LB, 350LB, 420LB
|
|
OUTER DIAMETER
|
10 lb = 16.0 in (406 mm), 25 lb\, 35 lb\, 45 lb = 17.625 in (448 mm)
|
|
INNER DIAMETER
|
2.0 in (50.8 mm)
|
|
THICKNESS
|
10 lb = 1.19 in (30 mm)25 lb = 1.88 in (48 mm)35 lb = 2.35 in (60 mm)45 lb = 2.80 in (71 mm)
|
|
MATERIAL
|
Natural Rubber and Styrene Butadiene Rubber
|
|
HUB
|
Stainless Steel Hub w/ reinforcement rods to prevent wear/separation
|
